All Products

One of the most common stripped bolt on the car are the stock brake rotor set screws on BMWs.  We decided to upgrade this part by now providing a s...

If you remember going to the hardware store as a child, I am sure you played with these thread pitch checker boards.  Now that you are an adult, it...

Replacing your engine air filter in a BMW is common maintenance, but unfortunately these little spring clips can be hard to remove.  At times they ...

If your BMW E36/Z3 is like most E36s at this point, this radiator switch plug has probably disintegrated into a million pieces.  You have probably ...

If it has not happaned already, soon these plastic radiator brackets for your E36 will break causing your radiator to move.  This could potentially...

If you are a car guy, most likely you are not running your baby through the automatic car wash.  We like to wash our cars ourselves and this auto d...

*AVAILABLE FOR PREORDER ONLY FOR INSTAGRAM SUBSCRIBERS (99 CENTS A MONTH) WILL BE AVAILABLE FOR THE GENERAL PUBLIC 2/19/24 The GT (Rieger) style f...

A common issue on the S6S420G transmission from the E46 M3 and E39 M5 is slop from the 5th and reverse gear.  BMW realized this, and made a solutio...

Replacing your old, worn out injectors is a very good thing.  Unfortunately, many of these clips are rusted, or get lost in the engine bay.  Good l...

FOR RACE USE ONLYThis is the large 105mm giubo (race flex disc) with 12mm bolt holes. It is commonly found on the E82, E90, E92, F32, F22, F10, an...

FOR RACE USE ONLYThis giubo (race flex disc) is the small 78mm with 10mm bolt holes. It is commonly found on E30 vehicles with an automatic or man...

FOR RACE USE ONLYThis giubo (flex disc) is for a 1983-1991 E30 BMW 3-series with an M50/M52/S50/S52 engine swap. It adapts the 96mm/12mm ZF transm...

FOR RACE USE ONLYThis giubo (race flex disc) is the small 78mm with 12mm bolt holes. It is commonly found on non-M E36 and E46 vehicles with a man...

FOR RACE USE ONLY!This is the large 96mm giubo (race flex disc) with 12mm bolt holes. It is commonly found on the E30, E36, and E46 M3, as well as...

Have you purchased Revshift's E8x/E9x non M motor mounts?  Even though Revshift uses their state of the art, proprietary polyurethane, the mounts ...

The Hole Shot gives you everything you need to take control of the streets, or shave off seconds on your lap time.  The kit includes motor and tran...

These mounts are designed for all BMW E82, E81, E87, E88, E90, E91, E92, and E93 cars with an N54 or N55 engine (excludes the M3). They are rebuild...

These mounts are designed for BMW F3X and F2X (4 cylinder, rear wheel drive). They are rebuildable and the polyurethane bushing inserts can be eas...

These mounts are designed for BMW F3X and F2X (6 cylinder, rear wheel drive). They are rebuildable and the polyurethane bushing inserts can be eas...

These mounts are designed for BMW AWD F3X and F2X (6 cylinder, all wheel Drive - AWD). They are rebuildable and the polyurethane bushing inserts c...

These mounts are designed for BMW F8X M4, M3, and M2. They are rebuildable and the polyurethane bushing inserts can be easily swapped out for a di...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

It is only a matter time before the OEM rubber rear subframe bushings in the Fxx platform become old and crack.  When this happens, the rear end mo...

When adding power or tracking your Fxx M3/M4, you can get play in the rear end.  Stiffen it all up with Revshift's billet aluminum dual differentia...

Drifting your E9x or E8x BMW? You came to the right place.  The solid drift spec rear subframe bushings from Revshift are the most hardcore bushin...

Drifting your E9x or E8x BMW? You came to the right place.  The solid drift spec rear subframe bushings from Revshift are the most hardcore bushin...

Revshift billet aluminum subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93 includ...

Revshift polyurethane subframe bushings completely replace the oem rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93 including ...

The E46 chassis has been known to develop cracks at the subframe attachement points with age.  If you are drifting or tracking your car, it is high...

On the M52 (OBD2) intake manifold, BMW uses this inlets air temperature sensor to measure the temperature of the air and send it to the DME for fue...

On the M52 (OBD2) intake manifold, BMW uses this inlets air temperature sensor to measure the temperature of the air and send it to the DME for fue...

Needing to replace your coolant temperature sensor on your M20 engine?  This is the one.  This sensor, also known as the brown top sensor, reads th...

If you have late model smiley or projector E30 headlights, they use these adjuster clips that tend to break and crack over time.  Once they crack, ...

If you are installing aftermarket headers, or a turbo manifold, it is most likely the stock exhaust studs will be too short.  Our extended exhaust ...

If you are installing aftermarket headers, or a turbo manifold, it is most likely the stock exhaust studs will be too short.  Our extended exhaust ...

Looking to add a dual rear caliper setup to your street or drift car?  Look no further.  Our CAD designed dual brake caliper brake adapters fit E36...

If you are having issues with your classic BMW gauge cluster, it is most likely that your SI board batteries no longer hold a charge.  We are now o...

The BMW E30 seat bolt caps go over the bolts and nuts that hold down your seats.  Unfortunately, BMW decided to no longer produce these leaving it ...

The stock power steering pump pulley on our BMWs are plastic, and allthough they do the job, over time they can become brittle and break, leaving y...

Are you looking to give your BMW interior a little upgrade?  Our CAD designed emergency brake handle is CNCed out of one block of aluminum.  Not on...

Installing a E30 IS front lip is a great addition to any late model BMW.  It adds a completely new aggressive look  at an affordable price.  If you...