E30-Safety & Track

People ask us constantly what wheel studs we prefer on track so we decided to start to offer them.  These are the Motorsport Hardware race studs. ...

The "Big Boy" clutch stop is a perfect replacement for your stock plastic one. This oversized rubber pad is fully adjustable to eliminate the free ...

If you have a track car with shoulder harnesses, you will notice the straps tend to move around on the roll cage bar, causing you to constantly adj...

The E30 hood quick release kit is a product you never knew you wanted until you have it. At the track, we found ourselves needing to open the hood...

Looking for a simple plug and play way to mount your phone on track? Here is our solution. Of course, we know there are many phone mount options, a...

CAD designed and 3D printed in the USA with high quality ABS plastic. The E30 OBC phone mount installs using the stock location tabs. No modific...

People ask us constantly what wheel studs we prefer on track so we decided to start to offer them.  These are by far the best race studs in the bu...

GoPro mounts are nothing new, but many offerings on the internet today are made of cheap plastic or do not offer the versatility. Since nothing su...

The "Small Boy" clutch stop is a perfect replacement for your stock plastic one. This was developed after the success of our "Big Boy" clutch stop ...

BMW no longer makes the OEM radio delete panel so we took it upon ourselves to come up with a solution.  This radio delete panel fits into the fact...

You may need wheel spacers for many different reasons, and when you do, there are no better quality spacers on the market than Motorsport Hardware....

Heavy Duty. These BMW tow straps are CNCd from one piece of stainless steel, and then wrapped in a chemical resistant polyester strap. Its time to ...

These tire markers (more of a crayon material) is the best solution for marking your used tires after track day sessions. If you ever used a paint...

​​​​​Looking for a little extra flare to your wheels while making it easier to remove and replace your wheels on track? Look no further, These exte...

Looking for an OEM+ solution to install your aftermarket gauges? This is E30 radio delete planel will sure do the trick. 3D printed out of ASA po...

NRG quick release components have been the go to products for years across many different racing series. We personally use this setup on our track ...

Who needs AC!? Because racecar! If you have deleted your AC from your E30 you will have an open space in your engine bay. This replaces the OEM rub...

You may need wheel spacers for many different reasons, and when you do, there are no better quality spacers on the market than Motorsport Hardware....

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

The Race German windshield banner is finally available. This is the same banner we use on our personal track car. Stand out from the crowd, and als...

How does one achieve the best shifting experience? They get the best shifter on the market. Kinematic Speed did not disappoint with this beauty. ...

A simple solution to blocking off the heater pipe on your BMW M20 engine to bypass in cabin heat for track/race cars. Each kit comes with an alumi...

If you are not a huge fan of the NRG ball lock quick releases, then say hello to their newest addition.  This quick release utilizes a safer keyway...

If you are looking to delete your E30 sun visors, then you will have an ugly hole there.  These E30 visor delete block off plates are the perfect p...

Many competitor's trailer tie down hooks are thin and will bend when your car is towed or tied down.  We set out to make the strongest trailer tie ...

Getting into drifting but not ready to install a full hydro setup?  This simple solution attaches to most BMW E brakes to give you the extension yo...

The Pit Lane  kit gives you everything you need to take control of the streets, or shave off seconds on your lap time.  The kit includes subframe, ...

There has never really been a clean gauge mount for E30s until now.  Our E30 OBC Gauge mount, fits perfectly flush in the stock OBC space, and req...

Sometimes fitting an aftermarket steering wheel to your BMW can be a hassle. There are many hub adapters out there but they all seem like they sti...

Let's face it, your car is going to break at the track, but that doesnt mean you have to be uncomfortable fixing it. These foldable, padded track ...

What's to say about this item? A simple solution to hang your helmet in between track sessions or races. CNC'd and coated black.

The Lap Record kit gives you everything you need to take control of the streets, or shave off seconds on your lap time.  The kit includes all the b...

Looking for the perfect companion to your Kinematic Speed Race shifter? Look no further with their brand adjustable selector rod.  Tailor your shif...

FOR RACE USE ONLYThis giubo (race flex disc) is the small 78mm with 10mm bolt holes. It is commonly found on E30 vehicles with an automatic or man...

FOR RACE USE ONLY!This is the large 96mm giubo (race flex disc) with 12mm bolt holes. It is commonly found on the E30, E36, and E46 M3, as well as...

BimmerWorld's TrackCAB (Treehouse) Solid Control Arm Mounts for your E30, E36, or Z3 are a hybrid mount/bushing set designed for drivers needing a ...

Stock BMWs do not give you the ability to adjust the camber on your front wheels. By giving your car slightly negative camber in the front you can ...

Looking for even more clearance? The standard shorty hub comes in around 1.75" and features a 6 bolt pattern you would need to bolt your quick rel...

After a hard track day you usually end up with quite a bit of rubber streaks on your hood, bumpers and mirrors. When your tires heat up they can s...

Chase Bays 82-91 BMW 3-Series E30 Front to Rear Brake Lines & Rear Hard Line Delete

Having a quality quick release fire extinguisher mount in your race or drift car is important.  These machined aluminum mounts secure tightly to yo...