E46-Data & Electrical

If you hate wiring aftermarket radios as much as I do, then look no further. This BMW VDO plug and play radio harness was made to take all the gue...

Don't lie, you know you have a bunch of mismatched fuses in your BMW. Over the years these have blown, and you stuck whatever you can find in there...

We all love old BMWs, and we all love music, but the problem is the stock head units are no good, and the aftermarket ones look out of place in the...

Here is a simple solution for adding an aftermarket coolant gauge. This adapter is machined out of aluminum and splices into your upper radiator ho...

Resetting your service and oil light on your BMW can be a hassle. Some jumper pins on the 20 pin connector to make this work. Now its a lot easier....

We probably get more questions about how to wire up an electric fan properly than anything else. Because of this, we put together a SPAL EZ fan rel...

The stock auxiliary fan on our BMWs don't actually push that much air, so a common upgrade is to replace it with a high flow SPAL electric fan.  We...

This is by far the easiest way to add an aftermarket oil pressure gauge to your BMW. The supplied stainless steel banjo bolt attaches this machined...

If you are looking for a way to tap into your coolant system to install an aftermarket temperature gauge, than look no further. We use a brand new...

Being able to read your oil pressure is a great idea for any performance car. This VDO oil pressure sender allows you to add an aftermarket VDO oi...

It's time to make your BMW E46 just a little more modern and this is a great first start.  This dual USB port is completely plug and play and makes...

Your standard OBD2 readers can only read basic codes. They are not able to read BMW specific engine codes. This can be crucial in diagnosing your e...

How many times have you been on track and your GoPro is recording your best session, and your battery dies? Never let this happen again with the ...

Mixing the best of both worlds. Our regular tapped aluminum thermostat housing has become a fan favorite to easily add an aftermarket coolant gauge...

The VDO M12x1.5 temperature sender is exactly what we use to screw directly in the head of most BMW engines to read the coolant temperature. This ...

There is no denying that SPAL electric fans are a great upgrade over the stock electric fan or mechanical clutch fun. But purchasing the fan is onl...

Most of the time, the places you need to tap into the oil system aren't in the greatest position. It is usually in a spot that is hard to get to. ...

Unfortunately, the VDO black series gauge we have known to love in the BMW community is no longer available.  VDO has now replaced it with their Si...

The VDO M12x1.5 temperature sender is exactly what we use to screw directly in the head of most BMW engines to read the coolant temperature. This ...

Unfortunately, the VDO black series gauge we have known to love in the BMW community is no longer available.  VDO has now replaced it with their Si...

This simple adapter will help you install a 1/8npt sensor into your obd2 BMW head. Made of 6061 aluminum in the USA.  Do not overtighten adapter. S...

Unfortunately, the VDO black series gauge we have known to love in the BMW community is no longer available.  VDO has now replaced it with their Si...

Finding a way to measure your fuel pressure is not always the easiest thing to do. We wanted to make your life just a little easier with this in-l...

Sometimes finding a good place to put aftermarket gauges can be a challenge. Gauges give you important information that you want front and center. ...

Finding an easy solution to tap into the oil system can often be a challenge but look no more. This vanos banjo bolt to AN fitting is the perfect s...

The VDO temperature sender is used to add an aftermarket coolant temperature gauge to your car. This simple sender reads the temperature of your c...

Our VDO Bluetooth radios have become one of our best sellers and for good reason.  Unfortunately, the E46 BMW has more of a built in radio and can ...

Used all over BMWs in many different applications.  Replace yours with a brand new OE replacement bulb. Replaces BMW PN 63217160793 Fitment: 318i ...

Looking for a plug and play solution to add an aux cable to your BMW?  Look no further.  This aux cable adapter plugs into the factory aux mode con...

On the M52 (OBD2) intake manifold, BMW uses this inlets air temperature sensor to measure the temperature of the air and send it to the DME for fue...

Unfortunately, the VDO black series gauge we have known to love in the BMW community is no longer available.  VDO has now replaced it with their Si...

A very common failure on BMWs.  When this resistor fails, your HVAC blower fan will no longer work.  Many people think it may be the actual blower ...

M52TU must use MS42 DME M54 must use MS43 DME (MS45 option now available!)S54 must use MSS54 or MSS54HP DME These Plug-and-Play wiring solutions wi...

On the M52 (OBD2) intake manifold, BMW uses this inlets air temperature sensor to measure the temperature of the air and send it to the DME for fue...

A very common failure on BMWs.  When this resistor fails, your HVAC blower fan will no longer work.  Many people think it may be the actual blower ...

M62 must use ME5.2.1 DME (5 small plugs)M62TU must use ME7.2 DMES62 must use MSS52 DME These Plug-and-Play wiring solutions will make your engine c...

*Note: Comes with CanBus emulator. N52 must use MSV70 DME (2006-2007)N52N must use MSV80 DME (2007-2013)N54 must use MSD80/MSD81 DME These Plug-and...