A/C Solutions

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in ...

Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retro...

Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement co...

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW ...

For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system t...

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, thi...

Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E...

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M8...

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C ...

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E28 to R134a usin...

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While ...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using...

Designed for use on the E24, E28, and E30, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports to char...

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, thi...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Designed for all E34 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retro...

Specific to R134a, this high tonnage expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replaceme...

Designed specifically for the E28 M5 and E24 M6/M635CSi and manufactured by CSF Cooling, this high-performance all aluminum radiator is a direct re...

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using...

Designed specifically for 24v swapped E30s, this line set provides you with plug-and-play R134a lines to be used with the E36 M3 Denso Compressor a...

Designed specifically for the late model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier retu...

Designed specifically for the early model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier ret...

Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E3...

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a usin...

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, thi...

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While ...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Designed specifically for the early model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return...

Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return ...