E46-All Products

Tail Light Assembly, LED, Red/Smoke Lens, Red Reflector, Pair, 4 pc., . Guaranteed To Improve Your Vehicles Appearance. Rigorously Tested For Fit A...

Tail Light Assembly, LED, Red/Smoke Lens, Red Reflector, Pair, . Guaranteed To Improve Your Vehicles Appearance. Rigorously Tested For Fit And Func...

Tail Light Assembly, LED, Red/Clear Lens, Pair, 4 Pc., . Guaranteed To Improve Your Vehicles Appearance. Rigorously Tested For Fit And Function. Si...

3-Ply Reinforced Black Silicone: Constructed of 3-ply reinforced silicone, this torque boost tube is resistant to cracking and hi-temp conditions. ...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cove...

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cove...

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 sta...

Unleash power and sound while improving the looks on your M3 Coupe with this MACH Force-Xp cat back system by aFe POWER. The larger diameter, mandr...

The OG Knob - Machined here in house at KinematicSpeed HQ from high quality Delrin. Finished with machined dimples or smooth for added grip and a u...

The E46 chassis has been known to develop cracks at the subframe attachement points with age.  If you are drifting or tracking your car, it is high...

Looking to add a dual rear caliper setup to your street or drift car?  Look no further.  Our CAD designed dual brake caliper brake adapters fit E36...

If you're looking for the real stuff, you came to the right spot.  This genuine BMW SAE 0W-30 full synthetic oil is what BMW uses in most of their ...

Over time the leather on the manual shift boots can crack causing you to have to replace the shift boot.  To do this, you will need to retain the b...

This single pump is one of the highest flowing around.  Supports well over 700hp in a Forced Induction application. The fuel pump is an E85 compat...

This adapter sleeve and clamp simplifies the installation of the larger base Walbro 400, 450, 485, 525 and 535 fuel pump into the factory fuel pum...

For all E46 Non-M cars.This adapter sleeve and clamp simplifies the installation of Aeromotive, Walbro, or other 39mm body fuel pumps into the fac...

BimmerWorld's TrackCAB Solid Control Arm Mounts for your Non-M E46 and M3 are a hybrid mount/bushing set designed for drivers needing a solid contr...

A 9.5" (ET35) wheel is a very common size for non-staggered wheels on E46 M3. It takes a 255-265-275 tire and still leaves plenty of clearance in t...

18x10 (ET33) is the go-to size for square track wheels on F87 M2, E46 M3, and F8X M3/M4. The 10.0" fits these cars with minimal clearance issues an...

This square set of BimmerWorld wheels for the E36, E46, F30, F32, Z3, and Z4 are a direct fit with no fitment hassle or interference issues. All fo...

This square set of BimmerWorld 17x9.0 wheels for the E36, E46, F30, F32, Z3, and Z4 are a straight fit with minimal fitment hassle or interference ...

This square set of BimmerWorld wheels for the E36, E46, E90, E92, F30, F32, Z3, and Z4 are a direct fit with no fitment hassle or interference issu...

This square set of BimmerWorld wheels for the E36, E46, E90, E92, F30, F32, Z3, and Z4 are a direct fit with no fitment hassle or interference issu...

A 9.5" (ET35) wheel is a very common size for non-staggered wheels on E46 M3. It takes a 255-265-275 tire and still leaves plenty of clearance in t...

18x10 (ET33) is the go-to size for square track wheels on F87 M2, E46 M3, and F8X M3/M4. The 10.0" fits these cars with minimal clearance issues an...

A 9.5" (ET35) wheel is a very common size for non-staggered wheels on E46 M3. It takes a 255-265-275 tire and still leaves plenty of clearance in t...

This staggered set of BimmerWorld wheels for the E36/E46 and F30/F32 are a direct fit with no fitment hassle or interference issues. Front wheels a...

The 17x9.0" ET42 is the most wheel you can fit under the body with minimal fitment issues. Using the same size at all four corners reduces underste...

The 17x8.5" ET40 is the easiest square set for the E36, E46, F30, and F32. Using the same size at all four corners reduces understeer and lets you ...

MTS Technik may be new to the USA market, but they are not new to designing and creating suspension systems. MTS Technik coilovers feature industry...

Revshift polyurethane differential bushings completely replace the OEM rubber bushings on the E46 (not M3 or Z4M). These bushings stiffen the diff...

Revshift polyurethane rear subframe bushings completely replace the OEM rubber bushings on the E46 (323, 325, 328, 330, M3, Z4). These bushings sti...

Rennstall is back at it again with this brand new Type 3 shift knob. Precision CNC'd in the USA out of black delrin, this shift knob is for those l...

Let's upgrade those brakes from your small single piston calipers to the massive 6-piston calipers from the C5/C6 Corvette Z06.Made from steel, th...

Keeping your glass clean is important for any type of driving, but especially so on track. When racing, all your energy is put in to the car, trac...

Another tool you didn't know you needed until now. The LiquiMoly Tornador carpet cleaning gun is a great tool to have in your detailing aresenal. ...

Stock BMW rear shock mounts are made of rubber, and overtime crack and wear out. MTS Technik has taken it up a notch and provided the last rear sho...

Extreme high performance polyglycol brake fluid. Far exceeds the standards of DOT 4. Each bottle is filled with Nitrogen, increasing shelf life and...

Track days can be brutal on your car, and somtimes your engine bay is over looked. Keeping your engine bay clean not only looks good, but it helps...