E46-All Products

This is by far the easiest way to add an aftermarket oil pressure gauge to your BMW. The supplied stainless steel banjo bolt attaches this machined...

We recommend this relay harness for wiring in single or dual high flow fuel pumps. This harness was built with the BMW 3-series in mind.  Wires ar...

Fuel starvation in high g corners, especially below a half tank, can be a major problem on track with your E30 or E36. This problem has now been s...

These extended brake lines fit both E46 M3 and E46 non-M cars with the front Porsche Brembo Big Brake Kit.  They will fit many other big brake kits...

Sometimes finding a good place to put aftermarket gauges can be a challenge. Gauges give you important information that you want front and center. ...

Finding an easy solution to tap into the oil system can often be a challenge but look no more. This vanos banjo bolt to AN fitting is the perfect s...

Let's add some more stopping power to your E46 M3! We now offer brackets for the E46 M3 so you can install the popular Porsche Brembo 996/Boxster-S...

Let's add some more stopping power to your E46 M3! These Upgrade your single piston rear calipers to a 4-piston caliper from the Porsche 996 or Box...

This single pump is one of the highest flowing around.  Supports well over 700hp in a Forced Induction application. The fuel pump is an E85 compat...

Attaching the oil drain line on our turbo can be a challenge.  Because of this, Rally Road created an extended turbo oil drain fitting to make it e...

There are many reasons you may want to convert your rubber fuel line to an AN system, and this adapter makes it a breeze.  Add an aftermarket fuel ...

Let's add a little more stopping power to your E36/E46! We now offer brackets for non-M3 E36 and E46 cars so you can install the popular Porsche B...

  Let's add a little more stopping power to your E36/E46! We now offer brackets for non-M3 E36 and E46 cars so you can install the popular Porsche ...

Having a problem fitting your aftermarket turbo to your E46 6 cylinder engine? (M54/S54)? Rally Road has solved this solution using 3D modeling and...

This single pump is one of the highest flowing around.  Supports well over 700hp in a Forced Induction application. The fuel pump is an E85 compat...

Similar to our standard oil distribution block, this is version also includes a custom 4AN banjo bolt the 2.0mm hole that can be used for a turbo o...

We found one of the best budget brakes kits for the Non M3 E36 and E46 is using OEM 135i Brembo 6 piston brakes.  This plug and play caliper bracke...

This adapter sleeve and clamp simplifies the installation of the larger base Walbro 400, 450, 485, 525 and 535 fuel pump into the factory fuel pum...

For all E46 Non-M cars.This adapter sleeve and clamp simplifies the installation of Aeromotive, Walbro, or other 39mm body fuel pumps into the fac...

Let's upgrade those brakes from your small single piston calipers to the massive 6-piston calipers from the C5/C6 Corvette Z06.Made from steel, th...