BMW E36 Motor Mount For Turbos

Having a problem fitting your aftermarket turbo to your E36 6 cylinder engine? (M50, M52, S50, S52)? Rally Road has solved this solution using 3D modeling and CAD to laser scan data from the OEM motor mount arms.  This creates a perfect motor mount every time.

The lower motor mount works best with low hanging turbo manifolds which easily allows for up to a 3.5" air intake pipe and the possibility of routing your charge pipe over the subframe and behind the AC compressor.

The second motor mount works best with a higher runner turbo manifold and allows for a 4"+ turbo intake pipe.

NOTE: It will also fit with the Turbonetics/Godspeed cast manifolds, but will not allow for over the subframe pipes.

If you plan to route your charge pipe under the subframe, the higher Style 2 mount is the one to buy as it will give the most intake clearance.

Fitment: M50, S50, M52, S52

Motor mounts to fit the following manifolds...
Turbonetics
Technique Tuning
SPA
Cartech
Steedspeed (E36 and E46 M3)
Godspeed (Turbonetics look-alike)
Active Autowerke

These motor mount arms are made from high strength steel and cadmium plated for corrosion resistance and good looks.