Revshift

Revshift billet aluminum subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93 includ...

Revshift billet aluminum subframe bushings completely replace the OEM rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93 includ...

These billet aluminum rear trailing arms fit the BMW E9x and E8x including the M models. They are CNC machined from 6061-T6 aluminum. These traili...

These mounts are designed for a 1983-1991 E30 BMW 3-series with a 24 valve M50/M52/S50/S52/S54 engine swap. They use the oem motor mount bolt holes...

Solid bolt through 70D polyurethane motor mounts. Recommended for race use only.These mounts are designed for a 1983-1991 E30 BMW 3-series with an ...

Solid bolt through 70D polyurethane motor and trans mounts. Recommended for race use only.These mounts are designed for a 1983-1991 E30 BMW 3-serie...

Revshift polyurethane rear subframe bushings completely replace the OEMrubber bushings on the BMW E34 5 series including the M5. They also fit the ...

If you're looking to tighten up the rear suspension of your E36 this is it. We have used and tested all different types of bushings over the years,...

The stock E36 rear subframe cracking is a common problem on these cars.  The stock M3 came with reinforcements from the factory, but the non M3 mod...

If you're looking to tighen up the rear suspension of your E30/Z3 this is it. We have used and tested all different types of bushings over the year...

If you're looking to tighten up the rear suspension of your E30 this is it. We have used and tested all different types of bushings over the years,...

If you're looking for stiffer motor mounts for your E36/E46/Z3, this is it. We have used and tested all different types of bushings over the years,...

If you're looking to tighten up the rear suspension of your E36/E46 this is it. We have used and tested all different types of bushings over the ye...

These mounts are designed for an E39 with a M52 or M54 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high grade polyuretha...

The stock BMW E46 front subframe is made out of stamped steel is prone to cracking under spirited or track driving.  These reinforcements act as a ...

Revshift polyurethane differential bushings completely replace the oem rubber bushings on the E46 M3 and Z4M. These bushings stiffen the different...

Revshift polyurethane differential bushings completely replace the OEM rubber bushings on the E46 (not M3 or Z4M). These bushings stiffen the diff...

Revshift polyurethane rear subframe bushings completely replace the OEM rubber bushings on the E46 (323, 325, 328, 330, M3, Z4). These bushings sti...

This weld in rear subframe / chassis reinforcement kit fits all BMW E46 models.The rear subframe mounting points on the E46 are notorious for crack...

These mounts are designed for all BMW E82, E81, E87, E88, E90, E91, E92, and E93 cars with an N54 or N55 engine (excludes the M3). They are rebuild...

Revshift polyurethane subframe bushings completely replace the oem rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93 including ...

Drifting your E9x or E8x BMW? You came to the right place.  The solid drift spec rear subframe bushings from Revshift are the most hardcore bushin...

If you're looking for stiffer motor mounts for your E9x M3, this is it. We have used and tested all different types of bushings over the years, and...

These mounts are designed for all BMW E82, E81, E87, E88, E90, E91, E92, and E93 cars with an N54 or N55 engine (excludes the M3). They are rebuild...

Revshift polyurethane subframe bushings completely replace the oem rubber bushings on the BMW E82, E81, E87, E88, E90, E91, E92, and E93 including ...

Fitment: BMW E90 / E92 / E93 M3 (2008-2013), E60 / E61 M5, and E63 / E64 M6.These transmission mounts are made by Revshift in the U.S.A. from high...

Drifting your E9x or E8x BMW? You came to the right place.  The solid drift spec rear subframe bushings from Revshift are the most hardcore bushin...

When adding power or tracking your Fxx M3/M4, you can get play in the rear end.  Stiffen it all up with Revshift's billet aluminum dual differentia...

It is only a matter time before the OEM rubber rear subframe bushings in the Fxx platform become old and crack.  When this happens, the rear end mo...

If you're looking for stiffer motor mounts for your M10 E30 (318), this is it. We have used and tested all different types of bushings over the yea...

If you're looking for stiffer motor mounts for your M20 E30, this is it. We have used and tested all different types of bushings over the years, an...

These mounts are designed for an E34 with the M30 or S38 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high grade polyuret...

If you're looking for stiffer motor mounts for your M42 E30 (318is), this is it. We have used and tested all different types of bushings over the y...

These mounts are designed for an E34 with the M50 engine Revshift polyurethane motor mounts are made in the U.S.A. from high grade polyurethane.Rev...

These mounts are designed for vehicles equipped with a BMW M60 engine. Revshift polyurethane motor mounts are made in the U.S.A. from high grade p...

If you're looking to tighen up the rear suspension of your E30/Z3 this is it. We have used and tested all different types of bushings over the year...

If you're looking to tighten up the rear suspension of your E36 this is it. We have used and tested all different types of bushings over the years,...

The Revshift M3 exhaust hanger insert is made from our 80A polyurethane. This part fits into the oem exhaust hanger. It prevents the hanger from sa...

If you're looking to tighten up the font suspension of your BMW this is it. We have used and tested all different types of bushings over the years,...

These mounts are designed for BMW AWD F3X and F2X (6 cylinder, all wheel Drive - AWD). They are rebuildable and the polyurethane bushing inserts c...

These mounts are designed for BMW F8X M4, M3, and M2. They are rebuildable and the polyurethane bushing inserts can be easily swapped out for a di...

These mounts are designed for BMW F3X and F2X (4 cylinder, rear wheel drive). They are rebuildable and the polyurethane bushing inserts can be eas...

These mounts are designed for BMW F3X and F2X (6 cylinder, rear wheel drive). They are rebuildable and the polyurethane bushing inserts can be eas...

One of my favorite suspension components ever made. These Revshift poly rear shock mounts are screaming quality. CAD designed and machined of out a...

If you're looking to tighten up the rear suspension of your E30 this is it. We have used and tested all different types of bushings over the years,...

If you're looking to tighten up the rear suspension of your E30/Z3 this is it. We have used and tested all different types of bushings over the yea...

Poly transmission mounts are a great way to tighten up your shifting experience. We have tested many mounts over the years and believe Revshift mak...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...