E8x-Engine

*NOW OFFERING EXTENDED STUDS FOR AFTERMARKET HEADERS Installing the OEM exhaust manifold studs can be a real pain. Since the stock studs do not hav...

*NOW OFFERING EXTENDED STUDS FOR AFTERMARKET HEADERS Have you ever gone to remove an exhaust stud and the stud and nut comes out as a pair? Have tr...

Replacing your old, worn out injectors is a very good thing.  Unfortunately, many of these clips are rusted, or get lost in the engine bay.  Good l...

These copper corrosive resistant nuts are the perfect combo for our upgraded exhaust studs. Anytime you change your headers, you should replace you...

*NOW OFFERING EXTENDED STUDS FOR AFTERMARKET HEADERS Installing the OEM exhaust manifold studs can be a real pain. Since the stock studs do not ha...

This is the correct vacuum hose for your BMW. Do not try to use the standard size (1/8, 3/16, 1/4) vacuum lines from your local automotive store. T...

Poly transmission mounts are a great way to tighten up your shifting experience. We have tested many mounts over the years and believe Revshift mak...

If you know you know.  BMW used to this blue braided hydraulic clutch hose on all their cars, but recently superseded it to a generic (lower qualit...

Freshen up your engine bay with this OEM BMW ///M logo oil cap. This is also a great addition if your current oil cap does not seal properlly anymo...

This is a common crush copper crush washer gasket used all over the BMW engine. The most used application for this gasket is for the radiator auxil...

If you are performing and engine swap, or just replacing your worn clutch hose firewall grommet, this is the part you need.  This grommet is placed...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

Looking to dress up your engine bay?  Look no further.  Our billet aluminum air conditioning service port cabs are CAD designed and machined out of...

BMW has been using this shifter cup in almost every generation BMW.  If your shifter feels sloppy or loose, it could be a worn shifter cup.  These ...

Are you adding a custom exhaust to your BMW or repairing your old one?  You might need to add a custom O2 sensor exhaust bung.  These high quality ...

Replacing your engine air filter in a BMW is common maintenance, but unfortunately these little spring clips can be hard to remove.  At times they ...

The oil pressure switch monitors your BMW's engine oil pressure.  A leaking or failed sensor switch can be disastrous and lead to engine failure. M...

Attaching the oil drain line on our turbo can be a challenge.  Because of this, Rally Road created an extended turbo oil drain fitting to make it e...

The rear main seal on our BMWs commonly leak and should be replaced.  It is also recommended to replace this seal anytime you remove the transmissi...

A worn flex disc can cause a lot of driveline vibration.  Replace yours today with this high quality OE replacement. Replaces BMW PN  26117511454,...

Replacement banjo bolt for your BMW.  These are 16x1.5x28mm Replaces BMW PN  32416852470, 32416783887, 32411094909, 32410141424 Fitment: ...