E46-Engine

Bleeding your M5x engine can be a nightmare at times. BMW set up their cooling system with an external reservoir and bleeder screw. The problem wi...

Replacing your old, worn out injectors is a very good thing.  Unfortunately, many of these clips are rusted, or get lost in the engine bay.  Good l...

This is the correct vacuum hose for your BMW. Do not try to use the standard size (1/8, 3/16, 1/4) vacuum lines from your local automotive store. T...

The plastic bleeder screws that come standard on BMW cooling systems do their job pretty well. However, they can strip pretty easily if you're not ...

One of the biggest causes of check engine lights is vacuum leaks. The OEM rubber vacuum line gets brittle from the heat and the cracks cause leaks....

OEM BMW Oil filters. Simply that. Filters will be Mann or Meyle depending on availability.

The M54 DISA valve is a great thing, but it has some faults from the factory.  In fact, if neglected, older DISA valves begin to rattle and the pin...

If you are looking for a way to tap into your coolant system to install an aftermarket temperature gauge, than look no further. We use a brand new...

Over the years of the engine bay heat cycling, the injector plugs can become worn and brittle.  When this happens, the plugs can break, leaving you...

A very popular upgrade for track cars. By replacing your original 92 degree thermostat with a 71 degree thermostat, you are allowing the coolant to...

Poly transmission mounts are a great way to tighten up your shifting experience. We have tested many mounts over the years and believe Revshift mak...

The OEM BMW water pump pulley on the M5x series of engines is plastic and can easily become brittle and break.  We have been selling our aluminum w...

Mixing the best of both worlds. Our regular tapped aluminum thermostat housing has become a fan favorite to easily add an aftermarket coolant gauge...

What do you get the guy that has everything? The final touch to his fan clutch delete. This machined cap is anodized black and covers the threads o...

The aluminum thermostat housing for the M5x/S5x engine familly is a very common upgrade. The stock thermostat housing is plastic and can crack ove...

The stock water pump pulley is plastic from the factory and has been known to crack over time from heat cycles and stress. The water pump is an imp...

Most of the time, the places you need to tap into the oil system aren't in the greatest position. It is usually in a spot that is hard to get to. ...

There is no denying that SPAL electric fans are a great upgrade over the stock electric fan or mechanical clutch fun. But purchasing the fan is onl...

If you are installing aftermarket headers, or a turbo manifold, it is most likely the stock exhaust studs will be too short.  Our extended exhaust ...

The stock power steering pump pulley on our BMWs are plastic, and allthough they do the job, over time they can become brittle and break, leaving y...

The stock pivot pin is made of plastic and over time, from use and heat cycles, the pin can wear down to a nub or shatter completely leaving you st...

Freshen up your engine bay with this OEM BMW ///M logo oil cap. This is also a great addition if your current oil cap does not seal properlly anymo...