E36-Suspension

People ask us constantly what wheel studs we prefer on track so we decided to start to offer them.  These are the Motorsport Hardware race studs. ...

You may need wheel spacers for many different reasons, and when you do, there are no better quality spacers on the market than Motorsport Hardware....

People ask us constantly what wheel studs we prefer on track so we decided to start to offer them.  These are by far the best race studs in the bu...

The rear lower control arms on the BMW E36 and E46 are non adjustable from the factory and made of a very thin metal that has been known to crack a...

The rear shock towers on our BMWs have been known to get stress cracks over time. It is always a good idea to reinfoce this area. These rear shock ...

​​​​​Looking for a little extra flare to your wheels while making it easier to remove and replace your wheels on track? Look no further, These exte...

The rubber in the rear shock mounts are known to wear and crack over time causing a clunking in your rear shocks. Worn rear shock mounts (RSM) can ...

You may need wheel spacers for many different reasons, and when you do, there are no better quality spacers on the market than Motorsport Hardware....

BC Racing has built a reputation for themselves over the years and is now one of the largest distributors of off the shelf and custom suspensions o...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

If you're looking to tighten up the font suspension of your BMW this is it. We have used and tested all different types of bushings over the years,...

Stock BMWs do not give you the ability to adjust the camber on your front wheels. By giving your car slightly negative camber in the front you can ...

One of my favorite suspension components ever made. These Revshift poly rear shock mounts are screaming quality. CAD designed and machined of out a...

Adding more horsepower, or upgrading to a stiffer motor and transmission mount bushing can cause extra stress on your front subframe.  Even with st...

One of the weakest points in the E36 rear suspension is the sway bar tabs. These are made from a very thin piece of steel and will crack over time...

The front sway bar end links are often overlooked when refreshing your BMW E30 suspension.  If you are hearing a clunking noise from the front, thi...

The BMW E36 LTW M3 was a very special car indeed, and with this chassis BMW developed a unique LTW strut bar to tighten up the chassis and improve...

There are a couple issues with the OEM BMW rear trailing arm brackets. First, the bracket is made out of thin stamped steel and can easily crack, r...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

If you're looking to tighten up the rear suspension of your E36 this is it. We have used and tested all different types of bushings over the years,...

If you're looking to tighten up the rear suspension of your E36 this is it. We have used and tested all different types of bushings over the years,...

BimmerWorld's TrackCAB (Treehouse) Solid Control Arm Mounts for your E30, E36, or Z3 are a hybrid mount/bushing set designed for drivers needing a ...

The Qualifier kit gives you everything you need to take control of the streets, or shave off seconds on your lap time.  The kit includes rear subfr...

The Apex kit gives you everything you need to take control of the streets, or shave off seconds on your lap time.  The kit includes all the bushing...

If you're looking to tighten up the rear suspension of your E30 this is it. We have used and tested all different types of bushings over the years,...

If you're looking to tighten up the rear suspension of your E36/E46 this is it. We have used and tested all different types of bushings over the ye...

If you having problems aligning your car or hear popping coming from your front wheels when you turn, it is most likely the ball joints in your out...

Looking for an alternative to the plastic solid motor mounts on the market?  Revshift came out swinging and is now announcing their solid drift mou...

The stock E36 rear subframe cracking is a common problem on these cars.  The stock M3 came with reinforcements from the factory, but the non M3 mod...

This high quality OE replacement part replaces your rear lower control arm on the E36 and E46.  This part will fit left or right side. *Note: Sold ...

The top strut mount is a vital component to your BMW suspension.  If you are hearing clunks or clicking when you turn, this could be your culprit. ...