Rear E36/E46 Non M3 Big Brake Kit Brackets (Porsche 996)

Let's add a little more stopping power to your E36/E46! We now offer brackets for non-M3 E36 and E46 cars so you can install the popular Porsche Brembo 996/Boxster-S caliper upgrade.  CNC machined brackets are designed to fit a Porsche 996 Brembo rear caliper to the E36 AND E46 non-M rear spindle.

Two rotors options are available for this brake kit.  They are to be paired with either E46 M3 rear rotors or E38 750i rear rotors.  The E38 750i rear rotors are the same 328x20mm size and offset as the E46 M3 rear rotors. but have a smaller diameter parking brake.

**The E46 330 uses a larger parking brake like the E46 M3, so use E46 M3 rear rotors on the 330i and 330Ci.

Calipers used for this conversion are Rear Calipers from the 1999-2004 Porsche 996 (non-turbo), the Boxster S or the Cayman S.  All these calipers are made from the same Brembo casting.

The Porsche caliper part numbers for this conversion are:
996.351.421 (driver side)
996.351.422 (passenger side)

Calipers will vary in color between Porsche model and options, but the castings will be the same as will the piston sizes.  

Proper pad placement with this bracket gives a full sweep of the rotor surface.  No rust rings on your rotor when using this brake setup.

The pair of rear brackets come with 4 bolts and washers to secure the calipers.

Note1: There is no machining required for the rear calipers to fit with this bracket.
Note2: Does not fit 318ti/Z3 non-M cars.  They have a completely different rotor/caliper setup.

You will need longer brake lines to install this kit.  We are now offering these as an option.