E36-All Products

Over the years of the engine bay heat cycling, the injector plugs can become worn and brittle.  When this happens, the plugs can break, leaving you...

If you have ever worked on an older BMW, it is more than likely you have stripped the brake bleeders before.  Overtime, corrosion can occur on the ...

Cue the BMW power steering leak jokes now...ok, now let's resolve this problem.  The OEM power steering reservoir is good, but when the fluid heats...

This single pump is one of the highest flowing around.  Supports well over 700hp in a Forced Induction application. The fuel pump is an E85 compat...

If you have a track car or ahigh horsepower E36, it may be a good time to add a dual pump setup.  This kit has been completely redesigned and now ...

If you have a track car or running E85 in your M5x BMW engine, this billet aluminum AN fuel rail by Rally Road is a must have.  This fuel rail is m...

Deleting the stock PCV system is very common on the M50 and S50.  To clean up your build, Rally Road developed this PCV to AN adapter that fits snu...

There are many reasons you may want to convert your rubber fuel line to an AN system, and this adapter makes it a breeze.  Add an aftermarket fuel ...

We recommend this relay harness for wiring in single or dual high flow fuel pumps. This harness was built with the BMW 3-series in mind.  Wires ar...

This adapter sleeve and clamp simplifies the installation of the larger base Walbro 400, 450, 485, 525 and 535 fuel pump into the factory fuel pum...

This adapter sleeve and clamp simplifies the installation of an Aeromotive or Walbro fuel pump into the factory fuel pump housing and carrier. Inc...

Take out all the guess work with Rally Road's high-quality M5x turbo feed line.  These are made specifically for the M5x series of engines from the...

Outfitting your E36 with a turbo was once a risky maneuver, but there is now so much information on the internet, that almost anyone can do it.  Wh...

Looking to have your BMW fuel injectors rebuilt but don't think you have the tools or are up to the task?  No problem.  We are now offering an inje...

Setting up your suspension can be tricky, especially if you do not have the correct tools.  If you are at the track, it wouldn't be very convenient...

Setting up your suspension can be tricky, especially if you do not have the correct tools.  If you are at the track, it wouldn't be very convenient...

We all know the BMW E36 door panels are not the best thing they have ever engineered.  The panels have plastic attachment points on the back that b...

The E36 LTW style spoiler has long been sought after for the E36 chassis.  It was first seen on the ultra rare Lightweight BMW introduced in 1995. ...

Unfortunately, the VDO black series gauge we have known to love in the BMW community is no longer available.  VDO has now replaced it with their Si...

Rebuilding your top feed fuel injectors is a job that can be done at home by the DIY mechanic.  To make life easier, we recommend using these fuel ...

If you are trying to install a cold air intake on an older BMW that has a M20, M30, or M42 you may find it difficult has the MAF is square, and mos...

These universal BMW injector retainer clips commonly fall into your engine bay where there is no retrieving.  Replace your lost or corroded clips w...

Our high quality 3" silicone couplers are perfect for attaching cold air intakes to your MAF sensor. These couplers are made from 4 ply reinforced ...

MTS Technik may be new to the USA market, but they are not new to designing and creating suspension systems. MTS Technik coilovers feature industry...

We know pressure washers can be a touchy subject, but that being said we have tried many different ones over the years.  We have really come fond o...

N52 must use MSV70 DME (2006-2007)N52N must use MSV80 DME (2007-2013)N54 must use MSD80/MSD81 DME These Plug-and-Play wiring solutions will make yo...

M62 must use ME5.2.1 DME M62TU must use ME7.2 DME S62 must use MSS52 DME Best used with the E39/M5 engine harness. These Plug-and-Play wiring solut...

Intended to be used with an E34 M60 engine harness with the round X20 connector.These Plug-and-Play wiring solutions will make your engine conversi...

M52TU must use MS42 DME M54 must use MS43 DME (MS45 option now available!)S54 must use MSS54 or MSS54HP DME These Plug-and-Play wiring solutions wi...

**M62 PRE-97: Intended to be used with the “474” ECU (Bosch ME5.2) (1 Single ECU Plug) **E39 M52 (OBD2) MS41 DME (Without round X20 connector) Thes...

One of the most requested kits we have been asked to put together is here.  Working with BMW and FCPeuro, these E36 shifter bushings kits are exact...

BimmerWorld's TrackCAB (Treehouse) Solid Control Arm Mounts for your E30, E36, or Z3 are a hybrid mount/bushing set designed for drivers needing a ...

This square set of BimmerWorld wheels for the E36, E46, F30, F32, Z3, and Z4 are a direct fit with no fitment hassle or interference issues. All fo...

This square set of BimmerWorld 17x9.0 wheels for the E36, E46, F30, F32, Z3, and Z4 are a straight fit with minimal fitment hassle or interference ...

This square set of BimmerWorld wheels for the E36, E46, E90, E92, F30, F32, Z3, and Z4 are a direct fit with no fitment hassle or interference issu...

This square set of BimmerWorld 17x9.0 wheels for the E36, E46, F30, F32, Z3, and Z4 are a straight fit with minimal fitment hassle or interference ...

This staggered set of BimmerWorld wheels for the E36/E46 and F30/F32 are a direct fit with no fitment hassle or interference issues. Front wheels a...