Textar DOT 5.1 Brake Fluid (500ml)

Textar brake fluid is the number one choice for dealerships across the country and is compatible with many different manufacturers.  If you are looking for a quality brake and clutch fluid, that doesn't break the bank, this is your reason to try today!

Textar DOT 5.1 Brake and Clutch Fluid, 500ml

Specifications & Performance:

U.S. FMVSS No. 116 Dot 3, Dot 4 & Dot 5.1, SAE J 1073, SAE J 1704, ISO 4925 (Classes 3, 4, & 5.1), JIS K2233 (Classes 3, 4 & 5)
Ford M6C9103A, M6C57A, M6C65-A1, M6C65-A3 GM 16072, GMW 3356; Mazda MN 120 C; Mercedes-Benz MB 331 Nissan NR3, NR4; Suzuki 59100-510XD; Toyota Class 3, Class 4, Class 5 VW / Audi TL766X, TL766Y

**Textar DOT 5.1 mixes safely with other brake and clutch fluids conforming to the above specifications.

Typical Dry Boiling Point: 271 °C. (520 °F.)
Typical Wet Boiling Point: 185 °C. (365 °F.)
Typical Viscosity @ -40 °C.: 815 cSt

NOT SUITABLE FOR VEHICLES WITH MINERAL BASED BRAKE OR CLUTCH SYSTEMS.

A very high performance brake and clutch fluid based on borate ester technology, providing excellent high temperature performance along with a viscosity far below that of the DOT 4 specification. The product also meets the requirements of the so called “Super DOT 4 (DOT 4 +) fluids.

DOT 5.1 fluids are popular for demanding applications in the European aftermarket because of their wide applicability and the enhanced user safety they offer. In many cases a DOT 5.1 fluid can replace several other grades with associated savings for the stockist.

As one would expect from a major brake manufacturer, expertise gained from long experience of working with braking systems and vehicle manufacturers benefits our entire product range with products being tested to standards far above the normal.

Features and Benefits:

• High boiling point to resist vapor lock.
• Very high wet boiling point to give extra safety margin in service.
• Lower viscosity (thinner) at low temperatures for increased performance in cold climates.
• Good lubricity
• High thermal stability
• Controlled rubber swelling
• Provides excellent protection against corrosion and oxidation

Recommendations for use:

• Vehicles for which a DOT 4 fluid is specified
• Vehicles for which a Super DOT 4 or DOT 5.1 are specified
• Vehicles fitted with modern braking systems (ABS / ESP)
• High performance vehicles
• Vehicles operating under arduous conditions (e.g. towing or use in mountainous areas)
• Vehicles operating in cold climates
• May also be used in older vehicles
• Hydraulic clutch systems

Storage and Handling:

This product is hygroscopic –it will absorb water from the atmosphere; always ensure containers are tightly closed. Not compatible with mineral oil or petroleum based materials; any contamination may cause serious damage to the brake system. Product will strip paint –avoid contact with paint of lacquer. Store in original container in a clean and dry location.
Product is of low toxicity but has an irritant effect on the eye. Avoid contact with eyes and skin. Observe normal good hygiene practices when handling this product.