All Products

This mounts hold the radiator against the front core support.  Must have piece or you can risk the radiator from hitting the engine.  This is an OE...

Crisp up your shifts and reduce play with this high quality 6 speed selector rod (DSSR) from Kinematic Speed. Improve shift feel E46 M3 with the Ki...

Crisp up your shifts and reduce play with this high quality 6 speed selector rod (DSSR) from Kinematic Speed. Improve shift feel and ensure the mos...

Hungry for horsepower? Dig into this crispy-fresh sticker, featuring a finger-lickin' twist on the classic KFC bucket, overflowing with tasty BMW c...

The Race German crank hub seal guard is designed with tight tolerances using OEM specs to ensure a perfect fit on E8x, Fxx, E9x N55 and S55 engines...

Say goodbye to squishy brake response and uneven pad wear. These precision-machined brass caliper guides replace the factory rubber bushings found ...

Ditch that brittle stock plastic pulley and upgrade to precision-machined performance. This aluminum water pump pulley kit replaces your factory pu...

A common issue on the E46, especially in track or drifting applications, are the rear trailing arm (RTAB) pockets.  When running solid, or harder b...

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E24 to R134a usin...

New for 2025! Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E28...

For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system t...

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M8...

New (unused), genuine (green-label) Sanden compressor direct from Singapore and built for high stressed applications. The 508 series is a proven de...

New (unused), genuine (green-label) Sanden compressor direct from Singapore and built for high stressed applications. The 508 series is a proven de...

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a usin...

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While ...

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using...

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in ...

Designed specifically for 24v swapped E30s, this line set provides you with plug-and-play R134a lines to be used with the E36 M3 Denso Compressor a...

This is a new (unused) Denso compressor from the E36 M3 and is designed to fit all S50, S52, S54, M50, M52, and M54 applications. Part number and m...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, thi...

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, thi...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retro...

Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return ...

Designed specifically for the early model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return...

Designed for Porsche, BMW, and more, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports (using the or...

Specific to the E30, this high tonnage R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended r...

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW ...

This medium profile SPAL 13" pusher fan is designed to be used in conjunction with our line of CSF high-performance parallel flow condensers (learn...

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While ...

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C ...

Designed specifically for the late model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier retu...

Designed specifically for the early model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier ret...

Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E3...

Designed specifically for the E28 M5 and E24 M6/M635CSi and manufactured by CSF Cooling, this high-performance all aluminum radiator is a direct re...

Designed with originality in mind, this kit is used to fit the Sanden 508 compressor (SD5H14) to the M20, M21, M30, M90, S38, or M88 engine using t...

Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E...

Designed with originality in mind, this kit is used to fit the Sanden 508 compressor (SD5H14) to the S14 or M10 engine block using a fully isolated...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Designed for all E34 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross compatible to the OEM BMW retro...

Designed specifically for the E28, this R134a A/C line is a direct replacement of your original high-pressure drier return line. While your origina...

Designed specifically for the E28, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. What'...

This high profile SPAL 13" pusher fan is designed to be used in conjunction with our line of CSF high-performance parallel flow condensers (learn m...

Designed for the enthusiast, this all new R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BM...