E30-All Products

Attaching the oil drain line on our turbo can be a challenge.  Because of this, Rally Road created an extended turbo oil drain fitting to make it e...

Unfortunately, the BMW E30 brake booster is no longer available.  Because of this we had to get creative, and found that the Porsche 944 brake boos...

Designed with originality in mind, this compressor bracket is used to adapt the Sanden 508 (SD5H14) or 709 (SD7H15) Compressor (standard exit or re...

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C ...

This Genuine SPAL 13" pusher fan is designed for use on our CSF Cooling high performance parallel flow condensers (learn more) to replace your fact...

Designed to work with our ACS Sanden Compressor Bracket (here), these new (unused), genuine (green-label) Sanden compressors are direct from Singap...

Designed to work with our ACS Sanden Compressor Bracket (here), these new (unused), genuine (green-label) Sanden compressors are direct from Singap...

Designed specifically for the E30 and manufactured by CSF Cooling, this high performance parallel flow condenser and SPAL fan upgrade will replace ...

Designed specifically for the E30 and manufactured by CSF Cooling, this high performance parallel flow condenser is used to replace your factory tu...

Designed with originality in mind, this compressor bracket is used to adapt the Sanden 508 (SD5H14) or 709 (SD7H15) Compressor (standard exit or re...

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. This switch is compatible with t...

Designed for use with our Sanden Compressor Bracket, Sanden Compressor (rear exit only), and E30 R134a Retrofit Kit, this line set is specifically ...

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While ...

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While ...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement co...

Designed specifically for the early model E30 325 (10/85 → 10/87), this A/C line is a direct replacement of your original high-pressure condenser t...

Designed specifically for the late model E30 318 and 325 (post 10/87), this A/C line is a direct replacement of your original high-pressure condens...

For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system t...

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for ...

Looking to take your interior to the next level?  These upgraded emergency brake handles are made of high quality plastic or choose 100% real carbo...

Getting into drifting but not ready to install a full hydro setup?  This simple solution attaches to most BMW E brakes to give you the extension yo...

Having a quality quick release fire extinguisher mount in your race or drift car is important.  These machined aluminum mounts secure tightly to yo...

The plastic power steering cap on most older BMWs becomes brittle and starts to leak.  Our new CAD designed, billet machined aluminum power steerin...

The OG Knob - Machined here in house at KinematicSpeed HQ from high quality Delrin. Finished with machined dimples or smooth for added grip and a u...

The Shorty Knob - Machined here in house at KinematicSpeed HQ from high quality Delrin. The Shorty Knob provides a 334mm overall height from the ba...

Looking for the perfect companion to your Kinematic Speed Race shifter? Look no further with their brand adjustable selector rod.  Tailor your shif...

Are you starting to collect water in your trunk during heavy rains?  The tail light gaskets are most likely your issue.  Replace these gaskets with...

Are you adding a custom exhaust to your BMW or repairing your old one?  You might need to add a custom O2 sensor exhaust bung.  These high quality ...

Have a weak hood strut on your E30 that keeps falling down and bumping your head?  Replace yours today with this high quality replacement.  We use ...

Have a tight clearance on your headers?  The stock copper exhaust nuts can cause issues on some aftermarket headers and turbo manifolds.  Our low p...

If you remember going to the hardware store as a child, I am sure you played with these thread pitch checker boards.  Now that you are an adult, it...

A product we always wanted to make and is finally here! If you have an early model E30 with the square c101 plug, it can be a hassle to cut, splice...

If you are a car guy, most likely you are not running your baby through the automatic car wash.  We like to wash our cars ourselves and this auto d...

Replacing your old, worn out injectors is a very good thing.  Unfortunately, many of these clips are rusted, or get lost in the engine bay.  Good l...

Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amoun...

South Bend / DXD Racing Clutch 87-93 BMW 325I/IS/IX/IC E30 2.5L Stg 3 Daily Clutch KitThis Part Fits: Year Make Model Submodel 1987-1993 BMW 325...